Float Switch LFL2-BK-U-PUR10-EMS
- Switch element: microswitch, mercury-free
- Limit value detection for fluids
- Ball design: high buoyancy
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of LFL2-BK-U-PUR10-EMS
| Electrical specifications | ||
|---|---|---|
| Contact loading | 250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load | |
| Rated insulation voltage | 300 V | |
| Pulse withstand voltage | 4 kV | |
| Electrical life | ≥ 5 x 104 switching cycles | |
| Directive conformity | ||
| Low voltage | ||
| Directive 2014/35/EU | EN 60947-5-1:2004 + Cor.:2005 + A1:2009 | |
| Conformity | ||
| Degree of protection | IEC 60529:2001 | |
| Application | ||
| Description | microswitch with switching ball, change-over contact | |
| Function and system design | ||
| Equipment architecture | This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. | |
| Operating conditions | ||
| Installation conditions | ||
| Installation instructions | range of application and minimum length between mounting and float: ≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluids mounting: The float switch is mounted by means of a counter weight or rods (e. g. float switch combination) from the top. The pivot of the cable should always be horizontal. |
|
| Process conditions | ||
| Process pressure (static pressure) | ≤ 2 bar (29 psi) at 20 °C (68 °F) | |
| Density | ≥ 0.6 g/cm3 | |
| Ambient conditions | ||
| Ambient temperature | 5 ... 70 °C (41 ... 158 °F) | |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Altitude | ≤ 2000 m above MSL | |
| Mechanical specifications | ||
| Degree of protection | IP68 | |
| Cable | ||
| Length | 10 m | |
| Mechanical construction | ||
| Material | float: PP (Polypropylene) cable: PUR, highly flexible (3 x 0.50 mm2) |
|
| Switching point | switch angle, measured against the horizontal: - upper switch point +25° ±10° - lower switch point -14° ±10° |
|
| General information | ||
| Supplementary information | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27200510 |
| ECLASS 12.0 | 27200510 |
| ECLASS 11.0 | 27200510 |
| ECLASS 10.0.1 | 27200510 |
| ECLASS 9.0 | 27200510 |
| ECLASS 8.0 | 27200510 |
| ECLASS 5.1 | 27200510 |
| ETIM 9.0 | EC011178 |
| ETIM 8.0 | EC011178 |
| ETIM 7.0 | EC011178 |
| ETIM 6.0 | EC001447 |
| ETIM 5.0 | EC001447 |
| UNSPSC 12.1 | 41111950 |
Details: LFL2-BK-U-PUR10-EMS
The microswitch (change-over contact) is integrated in a PP float and is activated in the event of deviations from the horizontal position. The switching ball in the float, which moves along an axis, activates the microswitch.
Datasheet: LFL2-BK-U-PUR10-EMS
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet LFL2-BK-U-PUR10-EMS | 667 KB | |
| Datenblatt LFL2-BK-U-PUR10-EMS | 670 KB |
Documents: LFL2-BK-U-PUR10-EMS
| Instruction manuals | File Type | File Size |
|---|---|---|
| Инструкции | 124 KB | |
| Návod k poużití | 120 KB | |
| Instruktions manual | 119 KB | |
| Instruction manual | 43 KB | |
| Kasutusjuhend | 117 KB | |
| Käyttöohje | 0 KB | |
| Manuel d'instructions | 58 KB | |
| Betriebsanleitung | 46 KB | |
| Οδηγίες χρήσης | 126 KB | |
| Handleiding | 119 KB | |
| Instruction manual / Betriebsanleitung | 118 KB | |
| Használati útmutató | 120 KB | |
| Manuale di istruzioni | 46 KB | |
| Lietošanas pamācība | 119 KB | |
| Instrukciju vadovas | 121 KB | |
| Instrukcja obsługi | 122 KB | |
| Manual de instruções | 119 KB | |
| Manual de utilizare | 120 KB | |
| Návod na poużitie | 120 KB | |
| Navodila za uporabo | 117 KB | |
| Manual de instrucciones | 57 KB | |
| Manual | 118 KB | |
| Technical information | ||
| Contamination declaration / Kontaminationserklärung | 137 KB |
CAD+CAE: LFL2-BK-U-PUR10-EMS
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 482 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: LFL2-BK-U-PUR10-EMS
| Declaration of Conformity | File Type | File Size |
|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1231 KB | |
| UK Declaration of Conformity (P+F) | 1285 KB |
Associated Products: LFL2-BK-U-PUR10-EMS
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.