Thru-beam sensor ML29-P/25/103/143
- Single-beam monitoring with extremely narrow sensor
- Integrated circuit
- Test
- Simple installation - Plug & Play
- Ideal for installation in door profiles or frames
- Light on version
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Technische gegevens ML29-P/25/103/143
| Productbeschrijving |
|---|
| Single-beam miniature sensor, ideal for installing in frames or door profiles |
| System components | ||
|---|---|---|
| Emitter | ML29-T/143 | |
| Receiver | ML29-R/25/103/143 | |
| General specifications | ||
| Effective detection range | 0 ... 6 m | |
| Threshold detection range | 8.5 m | |
| Light source | IRED | |
| Light type | modulated infrared light | |
| Opening angle | +/- 8 ° | |
| Optical face | lateral | |
| Ambient light limit | 40000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 880 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red in receiver : lights up when receiving the light beam | |
| Electrical specifications | ||
| Operating voltage | 11 ... 30 V DC | |
| No-load supply current | Emitter: ≤ 25 mA Receiver: ≤ 10 mA |
|
| Input | ||
| Test input | Test: Transmitter switches off at +UB ≤ 5 V DC | |
| Output | ||
| Switching type | light-on | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 0.1 A | |
| Switching frequency | 100 Hz | |
| Response time | 5 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 61000-6-2, EN 61000-6-3 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin plastic connector, 6.5 mm diameter | |
| Material | ||
| Housing | PMMA , black | |
| Optical face | Plastic pane | |
| Mass | per device 120 g | |
| Dimensions | ||
| Height | 85.2 mm | |
| Width | 11.6 mm | |
| Depth | 9.2 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: ML29-P/25/103/143
Datasheet: ML29-P/25/103/143
| Datasheet | Bestandstype | Bestandsgrootte |
|---|---|---|
| 数据表 ML29-P/25/103/143 | 478 KB | |
| Datasheet ML29-P/25/103/143 | 422 KB | |
| Fiche de données ML29-P/25/103/143 | 396 KB | |
| Datenblatt ML29-P/25/103/143 | 395 KB | |
| Scheda tecnica ML29-P/25/103/143 | 404 KB | |
| Hoja de datos ML29-P/25/103/143 | 398 KB |
Documents: ML29-P/25/103/143
| Brochures | Bestandstype | Bestandsgrootte |
|---|---|---|
| Product Information - TTA (Sensors for Doors, Gates, Elevators) - Branch overview / Produktinformation - TTA (Sensoren für den Tür-, Tor- und Aufzugsbau) - Branchenübersicht | 4008 KB | |
| Instruction leaflets | ||
| Instruction leaflet / Beipackzettel | 227 KB |
CAD+CAE: ML29-P/25/103/143
| CAD | Bestandstype | Bestandsgrootte |
|---|---|---|
| 3-D model emitter / 3-D-Modell Sender | STP | 73 KB |
| CAD 3-D additional / CAD 3-D additional | STP | 73 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: ML29-P/25/103/143
| Declaration of Conformity | Bestandstype | Bestandsgrootte |
|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 229 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | 225 KB |
Aanverwante producten: ML29-P/25/103/143
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
Of het nu om glas, zonnewafers of printplaten gaat, de optische sensoren van de ML100-series zijn volledig toegespitst op de vereisten van verschillende, gecompliceerde detectietaken. Leer meer over deze productportfolio...
Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
+32 3 644 25 00
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.