Serviceline Industrial Sensors
Tél.: +32 (0)3-644 25 00
Support en ligne pour la protection contre le risque d’explosion
Non disponible à la vente
Non disponible à la vente

Radar sensor RMS-D BROAD

RMS-D BROAD
  • Microwave motion sensor with intelligent functions
  • Reliable detection of people and vehicles
  • Direction detection
  • Cross traffic suppression
  • "Slow motion" for extremely slow motions
  • Simplest adjustement of the sensing range
  • Version with extra-wide detection area

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:


Caractéristiques techniques  RMS-D BROAD

Description produit
Premium radar motion sensor offering additional functions, dynamic version offering direction detection, wide detection range (2 m x 4 m), max. installation height: 4 m, black housing, relay contact output, cable connection
General specifications
Sensing range2000 x 4000 mm (DxW) at 2200 mm mounting height and 30° inclination angle
Function principleMicrowave module
Detection speedmin. 0.1 m/s
MarkingCE
Setting angle0 ... 40 ° in 5 ° increments
Operating frequency24.15 ... 24.25 GHz K-Band
Operating modeRadar motion sensor
Transmitter radiated power (EIRP)< 20 dBm
Functional safety related parameters
MTTFd640 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED red/green
Control elementsDIP switch for selection of operating modes : direction detection , cross-traffic suppression , Slow-motion , Switching type
Control elementssensitivity adjustment
Control elementsAdjustment for off delay
Electrical specifications
Operating voltage12 ... 36 V DC , 12 ... 28 V AC
No-load supply current≤ 50 mA at 24 V DC
Power consumption≤ 1 W
Output
Switching typeNO/NC
Signal outputrelay, 1 NO
Switching voltagemax. 48 V AC / 48 V DC
Switching currentmax. 0.5 A AC / 1 A DC
Switching powermax. 24 W / 60 VA
De-energized delay0.2 ... 5 s adjustable (1 sec factory setting)
Compliance with standards and directives
Directive conformity
R&TTE Directive 1995/5/ECThis device can be used in all countries within the European Union. Use in North America is not permitted. In other countries, all applicable national regulations must be observed.
Standard conformity
StandardsEN 62311, EN 60950-1, EN 301 489-1, EN 301 489-3, EN 300 440-2
Ambient conditions
Operating temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Relative humiditymax. 90 % non-condensing
Mechanical specifications
Mounting heightmax. 4000 mm
Degree of protectionIP54
Connectionplug-in screw terminals 4-pin , 5 m connecting cable included with delivery
Material
HousingABS, anthracite
Mass120 g
Dimensions123 mm x 65 mm x 57 mm
Height65 mm
Width123 mm
Depth57 mm
Suitable series
SeriesRMS

Classifications

SystemClasscode
ECLASS 13.027274501
ECLASS 12.027280890
ECLASS 11.027280890
ECLASS 10.0.127280890
ECLASS 9.027280890
ECLASS 8.027280890
ECLASS 5.127270990
ETIM 9.0EC004807
ETIM 8.0EC000138
ETIM 7.0EC000138
ETIM 6.0EC000138
ETIM 5.0EC000138
UNSPSC 12.139121528

Details: RMS-D BROAD

Informative Literature: RMS-D BROAD

Language Selection:
We are sorry, there are no documents for your language selection. Please select another language.

Product Documentation: RMS-D BROAD

Language Selection:
Brief InstructionsLangueType de fichierTaille
Brief instructionsFRAPDF729 KB
Recommended settings for RMS-D, RMS-D-RCENGPDF525 KB

Design / Simulation: RMS-D BROAD

Language Selection:
CADLangueType de fichierTaille
CAD 3-D / CAD 3-DALLSTP3730 KB

Produits associés : RMS-D BROAD

Accessories
Roof mounting- weather cap set for simple mounting on roofs and exposed positions, Protection from adverse effects of weather such as rain, snow, etc., Installation without toolsfa