Termination Board HiCTB16-TRX-RAC-PL-DO16

System board for Schneider Electric, Tricon CX series by Triconex
TAN48 approval
For 32-channel (16+16) DO card 3626X
For 16 modules
Recommended modules: HiC2871A (DO), HiC2873 (DO), HiC2883 (DO), HiC5861 (DO), HiC5863 (DO)
24 V DC supply
Hazardous area: pluggable screw terminals, blue
Non-hazardous area: ELCO socket, 56-pin

Technical Data
Documents
CAD+CAE
Approvals+Certificates
Aanverwante producten
Vraag het aan een Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Technische gegevens HiCTB16-TRX-RAC-PL-DO16

Supply
Connection		X20: terminals 3, 5(+); 4, 6(-)
Nominal voltage		24 V DC , in consideration of rated voltage of used isolators
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		≤ 10 %
Fusing		4 A , in each case for 16 modules
Power dissipation		≤ 500 mW , without modules
Reverse polarity protection		yes
Redundancy
Supply		Redundancy available. The supply for the isolators is decoupled, monitored and fused.
Fault indication output
Connection		X20: terminals 1(+), 2(-)
Output type		volt-free transistor output , not short-circuit protected , not overload protected
Rated voltage		30 V DC
Rated current		100 mA
Signal level		no fault: (external voltage) - 1 V max. for 100 mA (T_amb = 25 °C (77 °F)) power supply fault/module fault: blocked output (off-state current ≤ 10 µA)
Indicators/settings
Display elements		LED PWR1 (termination board power supply), green LED LED PWR2 (termination board power supply), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protection		IP20
Connection
	Field side	explosion hazardous area: pluggable screw terminals , blue
	Control side	non-explosion hazardous area: ELCO socket, 56-pin
	Supply	pluggable screw terminals , black
	Fault output	pluggable screw terminals , black
Core cross section		screw terminals 0.25 ... 2.5 mm² (24 ... 12 AWG)
Material		housing: polycarbonate, 10 % glass fiber reinforced
Mass		approx. 770 g
Dimensions		216 x 200 x 163 mm (8.5 x 7.9 x 6.42 inch) (W x H x D) , depth including module assembly
	Height	200 mm
	Width	216 mm
	Depth	163 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		CESI 06 ATEX 022
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Non-hazardous area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000
International approvals
UL approval		E106378
	Control drawing	116-0327
IECEx approval
	IECEx certificate	IECEx CES 06.0003
	IECEx marking	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210101
ECLASS 11.0	27210101
ECLASS 10.0.1	27210101
ECLASS 9.0	27210101
ECLASS 8.0	27210101
ECLASS 5.1	27210120
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: HiCTB16-TRX-RAC-PL-DO16

Datasheet: HiCTB16-TRX-RAC-PL-DO16

Datasheet	Bestandstype	Bestandsgrootte
Datasheet HiCTB16-TRX-RAC-PL-DO16	PDF	1239 KB
Fiche de données HiCTB16-TRX-RAC-PL-DO16	PDF	1247 KB
Datenblatt HiCTB16-TRX-RAC-PL-DO16	PDF	1242 KB
Datasheet HiCTB16-TRX-RAC-PL-DO16	PDF	1623 KB
Hoja de datos HiCTB16-TRX-RAC-PL-DO16	PDF	1246 KB

Documents: HiCTB16-TRX-RAC-PL-DO16

Manuals	Bestandstype	Bestandsgrootte
System Manual	PDF	5438 KB
Systemhandbuch	PDF	5450 KB
Instruction manuals
Инструкции	PDF	162 KB
Instruction manual / Betriebsanleitung	PDF	317 KB
Návod k poużití	PDF	157 KB
Instruktions manual	PDF	156 KB
Instruction manual	PDF	161 KB
Kasutusjuhend	PDF	153 KB
Käyttöohje	PDF	153 KB
Manuel d'instructions	PDF	158 KB
Betriebsanleitung	PDF	162 KB
Οδηγίες χρήσης	PDF	165 KB
Handleiding	PDF	157 KB
Instruction manual / Betriebsanleitung	PDF	156 KB
Használati útmutató	PDF	157 KB
Manuale di istruzioni	PDF	156 KB
Lietošanas pamācība	PDF	156 KB
Instrukciju vadovas	PDF	157 KB
Instrukcja obsługi	PDF	158 KB
Manual de instruções	PDF	157 KB
Manual de utilizare	PDF	157 KB
Návod na poużitie	PDF	156 KB
Navodila za uporabo	PDF	155 KB
Manual de instrucciones	PDF	157 KB
Manual	PDF	154 KB
Short instructions, safety information
Brief instructions	PDF	3237 KB
Kurzanleitung	PDF	3247 KB
Technical information
Pinout Table	PDF	141 KB

CAD+CAE: HiCTB16-TRX-RAC-PL-DO16

CAD	Bestandstype	Bestandsgrootte
CAD 2-D / CAD 2-D	ZIP	16364 KB

Approvals+Certificates: HiCTB16-TRX-RAC-PL-DO16

Certificates	Bestandstype	Bestandsgrootte
Brasil TUV Rheinland Brazil	PDF	1284 KB
CESI IECEx Certificate of Conformity	LINK	---
China SITIIAS CCC Ex Certificate	PDF	1842 KB
Europe CESI ATEX Category (1) GD ATEX Category (M1)	PDF	869 KB
India PESO (India) CCOE	PDF	100 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	PDF	478 KB
Control Drawings
Control drawing UL / Control drawing UL	PDF	166 KB
Declaration of Conformity
EU Declaration of Conformity (P+F)	PDF	189 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	181 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	179 KB
EU Declaration of Conformity (P+F)	PDF	180 KB
EU Declaration of Conformity (P+F)	PDF	181 KB
EU-Konformitäterklärung (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	189 KB
EU Declaration of Conformity (P+F)	PDF	180 KB
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	PDF	181 KB
EU Declaration of Conformity (P+F)	PDF	182 KB
EU Declaration of Conformity (P+F)	PDF	180 KB
EU Declaration of Conformity (P+F)	PDF	180 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	184 KB
EU Declaration of Conformity (P+F)	PDF	182 KB
EU Declaration of Conformity (P+F)	PDF	181 KB
EU Declaration of Conformity (P+F)	PDF	183 KB
EU Declaration of Conformity (P+F)	PDF	180 KB
EU Declaration of Conformity (P+F)	PDF	180 KB
EU Declaration of Conformity (P+F)	PDF	180 KB
EU Declaration of Conformity (P+F)	PDF	182 KB

Aanverwante producten: HiCTB16-TRX-RAC-PL-DO16

Matching System Components

	HiC2883 Solenoid Driver
	1-channel isolated barrier, 24 V DC supply (bus or loop powered), Output 45 mA at 12 V DC, Line fault transparency (LFT), Test pulse immunity, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Line fault transparency, Filter, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V bus powered via Termination Board 19 ... 30 V loop powered via input , reverse polarity protected, Type: logic inputpa

Accessories

	HiALC-HiCTB-SET-108 Label Carrier
	For HiC Termination Boards, 1 piece for 8-position Termination Board, 2 pieces for 16-position Termination Boardpa

	HiC2873 Solenoid Driver
	1-channel isolated barrier, 24 V DC supply (bus or loop powered), Output 40 mA at 12 V DC, 55 mA current limit, Contact or logic control input, Entity parameter I_o/I_sc = 110 mA, Line fault detection (LFD), Test pulse immunity, Up to SIL 2 acc. to IEC/EN 61508 (bus powered), Up to SIL 3 acc. to IEC/EN 61508 (loop powered), Housing width: 12.5 mm, Number of channels: 1-channel, Filter, Safety Integrity Level (SIL): SIL 3pa

	HiC5861 Relay Module
	1-channel signal conditioner, 24 V DC supply (loop powered), Logic input 19 V DC ... 27.6 V DC, Relay contact output for de-energized to safe function, Test pulse immunity, Up to SIL 3 acc. to IEC/EN 61508, Up to PL e acc. to EN/ISO 13849, Housing width: 12.5 mm, Number of channels: 1-channel, DTS function (de-energized to safe), Safety Integrity Level (SIL): SIL 3, Rated voltage: 19 ... 30 V DC loop powered, Type: 1 x logic input, Type [2]: 1 x test input, Type [3]: field device supplypa

	HiC5863 Relay Module
	1-channel signal conditioner, 24 V DC supply (loop powered), Logic input 19 V DC ... 27.6 V DC, Relay contact output for energized to safe function , Test pulse immunity, Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, ETS function (energized to safe), Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3, Rated voltage: 19 ... 30 V DC loop powered, Type: 1 x logic input, Type [2]: 1 x test input, Type [3]: field device supply, Test pulse immunitypa

Algemene opmerkingen met betrekking tot de informatie in de Pepperl+Fuchs productdocumentatie

Quick Links

Pepperl+Fuchs N.V.
Metropoolstraat 11
2900 Schoten / Anvers
BELGIË
BTW BE 0436.097.152, RPR Antwerpen, afd. Antw.
sales@be.pepperl-fuchs.com
phone +32 3 644 25 00

Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.